Retro Lightening Bolt-Softball
Retro Lightening Bolt-Softball
Sizing Guide:
ADULT |
10-11.5" WIDE OR TALL FOR MORE NARROW DESIGNS |
YOUTH |
8-9” WIDE OR TALL FOR MORE NARROW DESIGNS |
TODDLER |
7-8” WIDE OR TALL DEPENDING ON DESIGN |
INFANT |
5-6” WIDE OR TALL DEPENDING ON DESIGN |
LARGE POCKET |
4-5” WIDE OR TALL DEPENDING ON DESIGN |
KOOZIE/SMALL POCKET |
3” WIDE OR TALL DEPENDING ON DESIGN |
Pressing Instructions:
** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **
Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.
DTF TRANSFER FORMULA
275-300 degrees;
HEAVY PRESSURE 8-9 PSI.
Pre-press for 7 seconds to remove wrinkles and moisture, if needed
Press for 8-15 seconds; LET COOL, THEN PEEL
Press again for 8 seconds, with a butcher paper covering the design for protection
Important Notice:
Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise. If image is not high resolution the image quality printed will not be high resolution either. With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.